MIG1203
Insulation test system 1.2/50 up to 12kV
1.2/50µs lightning impulse generator up to 12 kV with 40 Ohm impedance. High voltage outputs on top plate protected by TC-ST test cabinet.
The MIG1203 is an insulation tester with a voltage wave shape 1,2/50. The specified voltage waveform is generated across an open circuit (oc), or within the load range specified under technical data. The exact waveform delivered is a function of the surge generator and the impedance to which the surge is applied. For failure detection (breakdown, flashover) the peak output voltage and current of the MIG are indicated on the front display and the two BNC monitor outputs (v,i) allow monitoring the voltage and current wave shapes on an oscilloscope.
Your Benefits
- Long duration test impulse repeatability
- Extreme reliability
- Extend application range with external networks
- Reproducible test results between locations
Features:
- Voltage impulse 1.2/50 us
- Solid state impulse discharge switch
- Electronic polarity switching
- Integrated peak measurement circuit
- Convenient BNC monitor outputs
IEC 60060-1 | High-voltage test techniques - Part 1: General definitions and test requirements |
IEC 61010-1 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
IEC 60664-1 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 61180 | High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment |
